Pressure Manifolds
The range of pressure manifolds is suitable for all types of static pressure instruments, from gauges to "smart" pressure transmitters. Available for direct or remote mounting, the pressure manifolds enable isolation, calibration and venting in a single unit.

Materials:
CS, SS, Monel^®, Duplex and other exotic materials

Seats:
Metal and Soft

Connections:
1/4" to 3/4" threaded, flanged, also available for direct mounting

Orifice Sizes:
.136"[3.5mm], 3/16"[4.7mm], 1/4"[6.4mm], 3/8"[9.5mm]

Pressure (max):
6,000 psig [414 barg]

Temperature (max):
1,000^°F [538^°C]

Flow Manifolds
Anderson Greenwood has the largest and most innovative range of differential pressure flow manifolds available in the world with models available for every kind of D/P instrument. These include conventional three and five valve manifolds as well as purpose designed models for special applications.

Materials:
CS, SS, Monel^®, Duplex and other exotic materials

Seats:
Metal and Soft

Instrument Connections:
1/4"to 3/4"threaded and suitable for direct instrument mounting

Process Connections:
1/4"to 1/2"threaded and suitable for instrument flanges

Pressure (max):
6,000 psig [414 barg]

Temperature (max):
1,000^°F [538^°C]

Level Manifolds
The M4 manifold is also available for liquid level service (M4TL). With two valves, one for the level "sense" line and one for the wet or dry leg, the M4TL mounts directly onto a D/P Transmitter.

Materials:
CS, SS

Seats:
Metal

Instrument Connections:
Flanged for direct mounting

Process Connections:
1/2"threaded

Pressure (max):
6,000 psig [414 barg]

Temperature (max):
1,000^°F [538^°C]